Products

Special Taps, Dies and Reamers can be manufactured in any quantity from one piece to hundreds. As prices for specials are based on the quantities ordered, please contact our order desk for a quotation of your needs. Standard industry assumes a 10% over/under shipment for specialty manufactured tools. If over/under shipments are not acceptable please advise us at time of quotation.
When ordering special taps, dies and reamers, the more information we have will enable us to determine the correct tool for your application. Below is a list of information required to accurately quote:

Special Taps

1. Size and Pitch of Thread
2. Class of Fit or Gauge Tolerances
3. Right or Left Hand
4. Thread Form
5. Lead - Single, Double etc.
6. Type of Material to be threaded - Grade, hardness and machining properties are all helpful
7. Type of hole to be threaded - Thru or Blind, if blind advise amount of clearance at bottom of hole
8. Depth of hole to be threaded, indicate any reach if applicable
9. Will Machine or Fixture affect the length of tap(s)
10. Will tap pass through or back out
11. Other features required: keyways, threaded shanks, oil holes, stepped shanks, hex drives etc.
12. Submit drawings or prints if possible
13. Coatings required: TiN, CrN, TiCN, Nitride, Steam Oxide etc.

Special Dies

1. Size and Pitch of Thread
2. Class of Fit or Gauge Tolerances
3. Right or Left Hand
4. Thread Form
5. Lead - Single, Double etc.
6. Material to be threaded
7. Cutting New Threads or Rethreading existing threads
8. Outside diameter & thickness of die
9. Length of part to thread
10. Special features which might affect die
11. Drawing of part or dies if possible

Special Reamers

1. Diameter of Reamer
2. Tolerance
3. Number of Flutes
4. Length of Cut/Flute Length
5. Straight or Spiral Flute - indicate Right or Left Hand Spiral
6. Pilots
7. Steps or Multiple diameters
8. Type of shank - Straight or Taper, indicate any special features
9. Tapered diameters - Large and Small End diameters and length of flute, degree of taper
10. Chamfer Angle and Length

NEW CATALOGUE!!!

Please check out our new catalogue:
  http://www.taylortool.com/wp-content/uploads/taylortool_catalogu:.pdf

We offer a huge stock of taps, reamers and dies. We also do specialty requests.

Taylor Tool is a premier manufacturer of special taps, reamers and dies for many different industries worldwide.

We can manufacture many diverse thread forms ranging from standard 60 degree thread profiles to special radius thread configurations.

Whether your requirements are special lengths, diameters or specific flute configurations Taylor Tool can accommodate all of your requests.

Taylor Tool began producing threading dies in North America in 1981. Since that time, we have continuously refined our processes and offerings to our customers.

Taylor Tool produces all of their threading dies out of M2 high speed steel; we can accommodate special requests to produce threading dies using a variety of specialty metals.

Our product size ranges are from 5/8″ to 8.0″ O.D round dies and hex dies from .710″ to 8.0″ AF (across the Flats).

Taylor Tool carries the largest special tap inventory in Canada, with same day shipments from our vast inventory of products.

We also offer our “JET TAP” service, which will manufacture any special tolerance limit or special thread profile of tap within 24 hours using standard tap blank dimensions.

Contact us for all your tapping needs.

www.taylortool.com

Contact Information

Taylor Tool is committed to providing outstanding customer service and would like to thank you for giving us the opportunity to serve you. Please contact us with any enquiries you may have and our friendly, knowledgeable staff will respond to your requests in a timely manner.

HEAD OFFICE

4 Goebel Avenue

Cambridge, ON N1R1V2

Tel: 519-658-9378

Fax: 519-658-6799

E-mail: sales@taylortool.com

British Columbia - Vancouver

Tel: 778-802-8277

Alberta - Edmonton

Tel: 780-851-8277

Alberta - Calgary

Tel: 587-887-8277